First, the importance of steel pipe welding seam treatment. Steel pipe welding seam treatment is an important step to ensure the quality of steel pipe welding. Under normal circumstances, welded steel pipe welds have problems such as welding defects, pores, and cracks. If not handled in time, the strength and sealing of the weld will be affected, thereby shortening the service life of the steel pipe and even affecting the safety of use.
Second, the steps for processing steel pipe welds
1. Cutting For uneven and porous welds, you need to use tools such as angle grinders to cut them out first. The cut weld seam should be smooth and free of pores and foreign matter to facilitate subsequent processing.
2. Grinding: Grind the surface of the cut weld to remove burrs and sharp edges during cutting to avoid causing new defects. You can use grinders, electric angle grinders, and other tools for grinding.
3. Filling Filling is an important step to repair weld defects and improve welding quality. The filling material should be the same or similar to the steel pipe material. Before filling, the steel pipe weld should be de-rusted first, and then the filling material should be evenly heated to the melting point, and then coated on the weld, and wait until the filling material solidifies. Grinding treatment.
Steel pipes are used in a wide range of applications, such as oil pipelines, sewage pipes, etc. Steel pipes are used. During the use of steel pipes, we need to weld the steel pipes. So what are the welding methods of steel pipes?
First, what are the welding methods of steel pipes, including electrode arc welding, submerged arc welding, molten inert gas shielded welding, and other welding methods? Before performing electrode arc welding, we need to clean the grooves of the two steel pipes, then use a manual electric welding arc to evenly heat the grooves, place the electrode, and use the electric arc to weld them. Next, we perform cover welding on the bottom welding. Secondary welding.
Second, what should you pay attention to when using steel pipes?
1. There are various types of steel pipes, including spiral steel pipes, straight seam steel pipes, galvanized steel pipes, stainless steel pipes, etc. When we use steel pipes, we must choose different types of steel pipes according to the use occasions, such as load-bearing columns of steel structures such as buildings and dams. Straight seam steel pipes can be used but spiral steel pipes cannot be used. Water pipes should be made of stainless steel pipes rather than galvanized steel pipes, etc.
2. When we use steel pipes, we often need to connect two steel pipes. There are various ways to connect steel pipes. We connect steel pipes through flange connection or welding. Before we weld the steel pipe, we must check whether there are any problems such as misalignment of the steel pipe. The oil stains on the surface must be cleaned in time. During the welding process, we must move the welder evenly to weld it. The welding current cannot be set too high. Or too small, otherwise it will affect the quality of welding.
3. Before using steel pipes and other steel materials, we must do relevant preservation work. For example, steel pipes and other steel materials cannot exist in wet places. When storing steel pipes, we should not place them directly on the ground. We can store the steel pipes after placing wooden mats on the ground. Corrosive items, etc. cannot be placed where steel pipes are stored.
Post time: May-14-2024